Should We Print Guns? Cody R. Wilson Says "Yes" (Video)

The Wiki Weapon Project and its idea of making guns with 3D printers has already been mentioned on Slashdot. It has also been written up on Forbes.com and a lot of other geek and non-geek sites. Note that when some Wiki Weapon proponents talk about making "guns" with 3D printers, they may be talking only about lower receivers or other static parts, not barrels, firing pins or other parts that must be machined to close tolerances and are subjected to a lot of stress when the gun fires. But low-cost 3D printing and low-cost CNC machining technologies are both advancing at a rapid rate, so thinking about the intersection of firearm manufacturing and open source is both worthwhile and timely. There's been a strong debate about this topic on Eric S. Raymond's Armed and Dangerous blog that's worth reading. Also recommended: The Home Gunsmith.com and CNC Gunsmithing. Astute Slashdot readers will, no doubt, recommend many more. Meanwhile, this video is about licensing, distribution, and legal matters, not the actual manufacture of firearms. There's a transcript (we're finally doing transcripts of selected videos) below the video for those who prefer to read instead of watch.