Step 2Safety
There are many ways that you can electricute yourselfs when doing this project, so please take the following precautions building this project, and don't get shocked and get a big blister like I did.
**NEVER EVER WORK ON YOUR POWERSUPPLY WHILE IT IS PLUGED IN**
*The capacitor inside holds enough electricity to cause an extremely painful shock, so discharge these capacitor with a power resistor with resistance over 10k ohm, just bend the resistor leads to the capacitor leads on back of the circuit board and make sure you hold the resistor with a pair of pliers because they tend to get very hot.
**NEVER EVER WORK ON YOUR POWERSUPPLY WHILE IT IS PLUGED IN**
*The capacitor inside holds enough electricity to cause an extremely painful shock, so discharge these capacitor with a power resistor with resistance over 10k ohm, just bend the resistor leads to the capacitor leads on back of the circuit board and make sure you hold the resistor with a pair of pliers because they tend to get very hot.
No comments:
Post a Comment